|
Intended
for use by those who would otherwise be unable to make use of
a standard length belt.
- Fits
all makes of Seat Belts where the webbing is attached to the
vehicle by a set screw/bolt.
- Adjusts
to provide up to 16" of additional webbing.
Comprises
of parts as used in the manufacture of Seat Belts to European
Standards and is manufactured in an ISO 9001: 2000 Quality controlled
environment.
FITTING
Disconnect
the lower outside end of existing Seat Belt from anchor point.
Securely connect the small end of the extender to the existing
Seat Belt using the bolt / washer / nut provided.
Before connecting
the extender to the floor anchor point, adjust the length, through
the double slotted anchor, to ensure the metal parts of the existing
belt / extender connection will not lie against the belt wearer
when in use.
|
